Skip to main content

Water Tube Natural Gas Steam Boiler

 Application scope of water tube steam boiler: school heating, food processing, petroleum refining, etc. Natural gas steam boiler flue gas flow: the burner is fixed on the front wall, after the fuel is sprayed from the burner, it is burned in the furnace with slight positive pressure, and the high-temperature flue gas generated is radiated and heated, and then turned 180° to the left behind the furnace The convection tube bundle that enters the second return journey flows to the front of the furnace and enters the horizontal superheater, turns 180° to the left in front of the furnace, enters the convection tube bundle of the economizer, and then fully exchanges heat through the economizer, and then enters the chimney via the flue atmosphere.



The natural gas boiler adopts the design idea of ​​flue gas cascade waste heat recovery, and a flue gas condenser is installed at the tail of the boiler body, which reduces the flue gas temperature (<; 100°C) and improves the boiler efficiency while reducing harmful components in the flue gas. ; Selection of burners and reasonable furnace structure to ensure sufficient combustion, emission of flue gas composition in line with the national first-class area environmental protection indicators, noise is also lower than the national standard.

The heating surface of the water-tube gas boiler is reasonably arranged, the technical parameters are selected appropriately, and the heat transfer area is surplus, so it has a certain overload capacity. Boiler flue gas and working fluid are arranged in countercurrent, with high average temperature and pressure, good heat transfer, reasonable selection of furnace volume, to ensure full combustion of fuel, and insulation materials using aluminum silicate felt and ultra-fine glass wool, with a total thickness of about 200mm. There is an air interlayer between the thermal insulation layers. This thermal insulation reduces the heat dissipation loss of the boiler, greatly improves the thermal efficiency, saves fuel, and lowers operating costs.

The SZS series steam boiler condenser not only absorbs a large amount of sensible heat in the flue gas, but also absorbs a large amount of latent heat in the flue gas, making the boiler efficiency higher than ordinary boilers, and the condensation waste heat recovery device adopts acid-resistant, chloride ion-corrosive ND steel. Greatly extend the service life of the boiler.



Manholes are arranged at the front and back of the upper and lower drums of the water-tube natural gas boiler, and inspection doors are arranged on the back of the furnace and on the flue to facilitate maintenance. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum outer casing and the frame are connected by bolts, which is convenient for disassembly and maintenance.

WhatsApp: +8618861589023


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more