Skip to main content

DZL 2 Ton Biomass Steam Boiler

 The DZL series steam boiler is a single-drum vertical water-fire tube shell boiler, and the combustion equipment is a chain grate. The water walls on the left and right sides of the furnace are radiant heating surfaces, the two wings of the furnace are convective heating surfaces, and the convection heating surfaces of threaded smoke pipes (457×3.5) are arranged in the drum. The outer side of the boiler main body is a three-dimensional protective plate shell.



The overall structure of the 2 ton biomass steam boiler body adopts an upper drum, a water-cooled wall tube and a header symmetrically arranged on the left and right sides. The drum consists of a middle 1200×14 cylinder and a middle 1200×12 front and rear tube plates welded together. The water wall tube is a medium 51x3.5 boiler tube, the header is a medium 159x6 boiler tube, and the down tube is a medium 133x6 boiler tube.

Chain grate steam boiler 2 ton steam boiler This series of steam boilers adopts new scientific research results, such as: arched tube sheet, threaded smoke tube, secondary air, chain grate, etc., which solves the problem of bulging and pipes in the lower part of the shell of the shell boiler. Problems such as plate cracks, low thermal efficiency, and insufficient output.



Technical characteristics of 2 ton steam boiler

  1. The use of arched tube sheet and threaded smoke tube to form the drum, so that the drum is changed from a quasi-steel body to a quasi-elastomeric structure, and the bracing parts in the tube plate area are eliminated and the stress is reduced. The smoke tube in the tube sheet is changed from two-pass to single-pass, which solves the problem of tube sheet cracks.
  2. As the lower part of the drum is arranged with the rising pipe row, the dead water area at the bottom of the drum is eliminated, so that the sludge is not easy to deposit, the high temperature area of ​​the drum can be well cooled, and the bulge in the lower part of the drum is prevented.
  3. The heat transfer threaded smoke tube is adopted to obtain an enhanced heat transfer effect, achieve the characteristics of boiler heating and pressure rise quickly, and improve the thermal efficiency of the boiler.
  4. The structure is compact, compared with the same type of boiler, the overall size is small, saving the capital investment of the boiler house.
  5. Stable operation, convenient adjustment, and sufficient output.
  6. The use of threaded smoke tube to enhance heat transfer, improve the heat transfer coefficient and thermal efficiency, because the flue gas has a disturbing effect in the tube. Dust is not easy to accumulate in the smoke pipe, which plays a role of self-cleaning.
  7. The eight-shaped wall in the furnace and the exit smoke window have a certain effect of reducing dust.
E-mail us: sunhui@zozen.com

Comments

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...