Skip to main content

WNS Type Gas Hot Water Boiler

 Gas-fired hot water boiler is a kind of gas-fired boiler. It uses natural gas, liquefied gas and other gas energy as fuel, and produces high-temperature hot water. It is widely used for heating and bathing in hotels, hospitals, schools, troops, shopping malls, residences, communities, etc. , The use is very wide. You can consult online or by phone and get the boiler price and parameters immediately!



Adopting WNS series horizontal three-pass structure, the fuel is burned, and the flue gas flows through the combustion chamber, the two-pass threaded smoke pipe and the three-pass threaded smoke pipe in sequence. After sufficient heat exchange, the flue gas enters the chimney in turn and is discharged into the atmosphere.

  1. Control system: intelligent control system, Internet of Things control, over-temperature alarm to ensure safety;
  2. Environmental protection requirements: ultra-low nitrogen emission, NOX＜30mg
  3. Advantages of gas hot water boiler

Environmental protection: the measured minimum NOX emission is 20mg/m³, which meets the strictest national environmental protection standards; energy saving: the measured 0.7 MW boiler air consumption is less than 60m³, which is much lower than the industry data; more than 100,000 cooperation projects have been reached, which can be inspected on the spot.

The gas-fired atmospheric hot water boiler adopts the WNS series shell structure, the furnace is operated under negative pressure, the heating surface is arranged reasonably, and it is equipped with well-known brand burners. The fuel is fully burned, the thermal efficiency is high, and the operating cost is low. Compared with atmospheric hot water boilers, gas-fired pressurized hot water boilers operate at higher than atmospheric pressure, with high outlet water temperature, stable operation and good energy-saving effect.



 The above is a detailed introduction of gas-fired hot water boilers. Gas-fired hot water boilers can be used for heating and domestic water. Welcome to consult and understand.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more