Skip to main content

SZS Type Water Tube Hot Water Boiler

 The watertube hot-water boiler series adopts a double-boiler vertical "D" arrangement structure. The flame and flue gas burn and flow outside the tube. It has a very fast steam and water flow rate and an excellent water circulation system. The boiler has both heat absorption and thermal efficiency. A great degree of improvement.



This series of hot water boilers are combined into a complete thermal energy system, while ensuring low nitrogen emissions, the thermal efficiency is increased to 106%. The boiler is of high temperature tolerance type, and it can be used in areas with difficult environments such as high cold and high altitude.

SZS series hot water boiler adopts intelligent PLC automatic control system, high-color touch screen, dynamic graphic display, multi-level pop-up menu, automatic fault recording and other operation modes, which are simple and clear. The boiler is designed for installation and commissioning in the factory. The user only needs to install water and electricity at the site for normal use.

The watertube hot water boiler is a diffuse combustion, which can meet the technical requirements of large tonnage, and the nitrogen oxide emission is less than 30mg, which meets the strict air emission standards. The boiler has three operation modes: single connection, series connection, and parallel connection. The number of boilers and operating status can be flexibly selected according to actual needs.

SZS series boilers use self-developed wing heat exchange elements, which reduce the floor space by more than 20% compared with ordinary condensing vacuum boilers. The boiler is equipped with a high-color touch screen, dynamic graphic display, multi-level menus and permissions, and automatic fault storage and other modules, which are very user-friendly.

The boiler wall piping of the hot water boiler adopts a full-membrane water-cooled wall structure, which has a very good pressure-bearing capacity. In the state of slight positive pressure combustion, the fuel can be fully burned to improve the efficiency of the boiler; the furnace body has a good sealing structure, and the boiler operates There will be no undesirable phenomena such as smoke and air leakage.



Condensing technology is added to this series of water tube hot water boilers, and the overall thermal efficiency of the boiler has been greatly improved. The condenser can not only absorb a large amount of sensible heat in the flue gas, but also absorb sufficient latent heat of the flue gas. The boiler efficiency is much higher than that of ordinary boilers. The condensing recovery device is made of ND steel that is more resistant to acid and hydrogen ion corrosion. The service life of the boiler can be improved. Extend to as long as 20 years.

E-mail us: sunhui@zozen.com


Comments

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...