Skip to main content

Horizontal Gas Thermal Oil Boiler Manufacturer

 The gas-fired thermal oil boiler adopts a three-pass coil design, and the system is equipped with an expansion water tank to realize low-pressure and high-temperature heating. The coil structure is adopted, the heating surface is sufficient, and the expansion is fully absorbed. Imported low-NOX burner, full combustion, is an environmentally friendly product.



The touch screen computer controller and digital computer controller can be used for automatic control of this series of thermal oil boilers. With automatic temperature adjustment, automatic ignition, and differential pressure, over-temperature, flameout protection. Boiler manufacturing specifications are manufactured in strict accordance with relevant standards.

Gas-fired thermal oil furnaces are mainly used for heating crude oil and natural gas and processing, storage, and transportation of mineral oil in the industry. The oil refinery uses heat transfer oil to preheat the cold material, and it has been successfully used to heat the solvent and extractant evaporation devices in the lubricating oil manufacturing process.

Compared with steam heating, the use of thermal oil heating has the advantages of uniform heating, simple operation, safety and environmental protection, energy saving, high temperature control accuracy, and low operating pressure. It has been widely used as a heat transfer medium in modern industrial production. application.

In the chemical industry, it is mainly used for distillation, evaporation, polymerization, condensation/demilking, fatification, drying, melting, dehydrogenation, forced insulation, and heating of synthetic equipment such as pesticides, intermediates, antioxidants, surfactants, and fragrances. 



The horizontal thermal oil boiler has less oil capacity, fast heating speed and long service life. The boiler adopts a reasonable flow rate of hot oil and the overall consistency of the flow rate to ensure that the furnace tube will not burst due to carbon formation, which not only ensures the safety of the boiler, but also prolongs the service life of the oil. The boiler is simple to install, easy to use, small in area, and beautiful in appearance.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more