Skip to main content

Manufacturing of Horizontal Oil-Fired Steam Boiler

 The design and manufacture of the oil-fired steam boiler body adopts a three-pass, wet-back type, and the fire box is an eccentric furnace with asymmetrical structure. The furnace tube is designed as a corrugated tube, which can reduce the stress caused by thermal expansion, increase the rigidity, enhance the flue gas disturbance, improve the thermal efficiency, and increase the radiant heating area.



This series of boiler heat transfer tubes basically use threaded tubes, which makes the flue gas flow longer, forms a strong convective heating surface, and has a good heat transfer effect. The oil-fired boiler is equipped with high-quality imported burners (low NOx type burners), which burn fully, and the harmful components in the flue gas are lower than the national standard (NOx emission is lower than 400mg/m3), which is an environmentally friendly product.

The horizontal steam boiler has rich control functions, with insufficient gas pressure and leakage alarms. The application of advanced digital intelligent control technology can accurately monitor the combustion process remotely. It adopts advanced imported components and has multiple interlocks. Can add communication interface and print boiler operating parameters and design and install a computer control system for multiple boilers.



This series of steam boilers have special indicator lights, all parts are clear at a glance, and automatic leak detection is provided to prevent accidents caused by leakage. A condensing heat exchanger or air preheater can be added to increase the thermal efficiency of the boiler. After the addition, the boiler efficiency can be increased to more than 95%.

E-mail us: sunhui@zozen.com

Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more