Skip to main content

Energy Saving Biomass Particle Thermal Oil Boiler

 The heating surface of the biomass thermal oil furnace is reasonably arranged, the organic heat carrier (heat-conducting oil) has a long service life, high temperature and low pressure, and can obtain a higher working temperature under a lower operating pressure. The liquid phase transports heat energy. The organic heat carrier (heat transfer oil) at less than 300°C has a saturated vapor pressure of 70 to 80 times lower than that of water. The pressure condition of the heating equipment can be greatly reduced and the equipment cost can be reduced.



Biomass particle thermal oil boiler is a high-temperature, low-pressure, energy-saving equipment that uses heat-conducting oil as the heat carrier to force the heat carrier to circulate in the liquid phase through a circulating oil pump, transfer the heat to the heating equipment, and then return to the heating furnace for reheating. The heating temperature of this series of thermal oil boilers can be as high as 340℃, and the working pressure is generally below 1.0MPa, because it works in the liquid phase.

YLW series thermal oil boiler has reasonable structure, small footprint, small size, beautiful appearance, simple management, heat, energy saving effect and economic benefit. Biomass thermal oil furnace temperature adjustment, equipped with operation control and safety monitoring devices, high degree of automation, low labor intensity of workers, while saving energy and reducing consumption.

Biomass fired thermal oil boiler adopts closed-circuit circulation, liquid-phase transport heat energy, heat loss is small, energy-saving effect is remarkable, and the effect is good. Equipped with water pipe waste heat steam boiler and steam generator to realize one boiler and two uses, and the energy saving effect is remarkable. This series of boiler products have technical measures to strictly control the content of air, moisture and other low volatile matter in the working medium before circulating heating.



The oil-steam separator used in the biomass pellet thermal oil boiler is mainly used to separate and remove air, water vapor and other gases in the heating system, so as to ensure that the heat-conducting oil operates stably in the liquid phase without gas and water. Each boiler must undergo rigorous inspection and testing before leaving the factory, including water pressure test and X-ray inspection. There are manholes, inspection doors, fire viewing holes, etc., which are very convenient for maintenance. The characteristics of biomass boilers are: energy saving, environmental protection, and easy to install and use.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more