Skip to main content

Biomass Industry Thermal Oil Boilers For Sale

 Biomass thermal oil boilers can obtain higher working temperature under lower operating pressure. Under all levels of load, the thermal efficiency can be maintained at a good level. With a complete control system and safety monitoring device, the temperature rise is stable and controllable. The coil is compact, closed loop, and low heat loss. The furnace wall has excellent thermal insulation materials and good thermal insulation effect. The boiler adopts quick assembly or assembly leaving the factory, which is convenient for transportation and installation.



The biomass fired boiler uses biomass briquettes (broken wood, firewood, straw, corn cobs, various husks, and various biomass briquettes, etc.), and blows through the fan to achieve controllable furnace temperature and air intake, so that the fuel Fully gasification and combustion in the furnace. The product has functions of cooking, heating and boiling water. Biomass semi-gasifier is a new generation, environmentally friendly, energy-saving cooking heating furnace. It is also called low-emission furnace because of its high thermal efficiency and low smoke and dust emissions when used. It is based on combustible biomass (firewood, straw, sawdust, chaff, leaves, etc.) ) And coal as fuel. By gasifying biomass in the furnace to produce combustible gas, the combustible gas is burned again under the secondary oxygen supply in the upper layer of the furnace to achieve full combustion of biomass and improve the thermal efficiency of the furnace. Reduced smoke and dust emissions. Compared with traditional large stoves, using this technology can greatly improve the overall thermal efficiency of stoves, achieve the purpose of saving firewood and coal, and reduce the amount of smoke and dust emissions through secondary oxygen combustion. The flue gas will be discharged to the outdoors through the flue pipe. The problems of large stoves, high pollution, high emissions, and high energy consumption in rural areas have been solved, and the goals of environmental protection and energy conservation have been truly realized.

The biomass boiler directly ignites the biomass on the top of the furnace (up-ignition, anti-combustion). The temperature of the furnace rises rapidly in a short time (3-5 minutes). When a certain high temperature is reached, the biomass in the furnace can be gasified into combustible Gas (also called volatile matter), combustible gas is burned again under the secondary oxygen supply in the upper part of the furnace, and a large amount of heat is generated to heat directly from the top of the furnace. The biomass in the lower layer is continuously gasified and burned until the combustion is completed under high temperature conditions. Since the combustible gas formed by the biomass gasification is directly and fully burned under the secondary oxygen supply, the emission of smoke and dust is reduced, the thermal efficiency is improved, and the requirements of energy saving and environmental protection are met. Biomass boiler biomass pellet fuel characteristics: biomass application transformation methods: there are three main application transformation methods of biomass: thermochemical method, biochemical method, and extraction method. Thermochemical method refers to the conversion technology that converts biomass into other ways of energy at high temperature, mainly including four ways. Biomass boiler is a kind of boiler that uses biomass as raw material to convert biomass into fuel by gasification and solidification.



YLW series thermal oil boiler is a square-coil horizontal chain grate assembly boiler, and the chain grate and the boiler body are separated from the factory. The boiler adopts a chain grate to realize mechanical coal charging, is equipped with a drum and an induced draft fan for mechanical ventilation, and is equipped with a slag discharger to realize mechanical slag discharge.

When this series of boiler products are in operation, the fuel falls from the coal hopper to the grate for combustion, and the high-temperature flue gas is reflected from the back arch to the front of the furnace and enters the furnace. Then it leads to the waste heat boiler, then enters the air preheater, and enters the dust collector. After dust removal, the flue gas is drawn by the induced draft fan and discharged to the atmosphere through the chimney.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more