Skip to main content

YYQW Gas Thermal Oil Boiler For Sale

 YYQW gas fired thermal oil boiler is a new type of special boiler, also known as thermal oil boiler, with low pressure and high temperature working characteristics, and its heating temperature can reach 340°C in liquid phase or 400°C in vapor phase. Any process that requires uniform and stable heating and does not allow direct flame heating can be used in various production occasions where the heating temperature is between 150 ℃ and 380 ℃, and organic heat carrier can be used for heating.

 The horizontal gas-fired thermal oil boiler uses gas as fuel and heat-conducting oil as the medium. The heat oil circulating oil pump is used to force the medium to circulate in the liquid phase. The heat energy is transferred to the heating equipment and then returned to the heating furnace for reheating. Obtain a high working temperature, and can carry out high-precision control of the operation of the medium.



This series of thermal oil boiler system has high heat utilization rate. Due to the integral installation of the module, it is convenient to operate and maintain. It is an ideal heating equipment with safety, high thermal efficiency and energy saving. The fuel oil (gas) is ignited by the combustor and the high-temperature flame enters the inner coil to form a radiant heating surface, and enters the interlayer area of ​​the inner, middle and outer pipes through the rear of the inner coil through 180° forward rotation to form a convective heating surface. Then enter the second interlayer area of ​​the middle and outer coils at the upper part of the interlayer, and exhaust into the atmosphere at the back of the second interlayer area to the chimney.

Gas thermal oil boiler industry field

  1. Chemical industry-oleochemical, polymerization industry, reaction tank, distillation, concentration.
  2. Plastics industry-plastic firing, extrusion and shaping.
  3. Textile industry-resin setting machine, dyeing machine, drying room, high temperature machine, roller machine.
  4. Rubber industry-vulcanization heating of rubber.
  5. Food industry-cooking, drying, vegetable oil refining.
  6. Forest products industry-heating and shaping of splint, polystyrene board and fiberboard.
  7. Paper product industry-multi-layer cardboard for packaging cartons, drying and drying.
  8. Others-heating of metal electroplating tanks, coating condensation, drying, medical industry distillation, reduction, concentration, dehydration, etc.

Performance characteristics of gas thermal oil boiler

  1. Obtain low-pressure and high-temperature heat medium, easy to adjust, uniform heating, and can meet accurate process temperature.
  2. Liquid-phase circulation heating, no heat loss due to condensation, and high thermal efficiency of the heating system.
  3. There are technical measures to compensate the volume changes caused by the heating and releasing of the working medium and the temperature rise and fall.
  4.  There are technical measures to strictly control the content of air, moisture and other low volatile matter in the working medium before circulating heating.

 


The body, oil storage tank, oil-steam separator, filter circulating pump, oil injection pump, valve, instrument, electrical control cabinet and other parts of the gas-fired heat-conducting oil boiler are transported as a whole. High expansion tanks and platform escalators are packaged separately. The factory technical documents, product factory list, and installation instructions are supplied with the furnace.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more