Skip to main content

Horizontal Biomass Hot Water Boiler Price

 The horizontal biomass hot water boiler is a kind of horizontal three-return water and fire tube boiler, which has a bunch of threaded smoke pipes arranged in the boiler barrel. The left and right sides of the furnace chamber are equipped with water cooling walls of light pipes. Light chain grate is adopted to realize mechanical feeding, equipped with blower and induced draft fan for mechanical ventilation, and equipped with scraper type slag discharge machine for automatic slag discharge. The front and rear arches of the furnace adopt new energy saving technology. After the fuel falls from the hopper to the grate and enters the furnace for combustion, the flame, through the rear arch refraction, turns upward through the burning chambers on both sides of the body and turns to the front smoke box, and then turns back to the tube bundle in the pot by the front smoke box, enters the economizer through the rear smoke box, and then is pumped by the induced draft fan through the flue to the chimney and discharged to the atmosphere.



The biomass fired boiler heat transfer system is composed of a boiler barrel, a set box, and a water cooling wall. The main heating surface has a furnace water cooling wall, part of the boiler barrel and a convection tube bundle inside the boiler barrel. The main heating surface pipe is made of seamless steel tube, and the boiler barrel is made of special steel plate for the boiler. The left and right containers are made of seamless steel tubes. The arch of the hot water boiler is made of fire-resistant concrete. The rear arch is low and long, so it burns well. The wings of the flue and the side wall tiles are made of refractory sintered bricks. Boiler front wall and back wall adopt universal firebrick.

This series of industrial boiler has reasonable exhaust ventilation, large combustion chamber and strong applicability of coal. Adapt with biomass pellet and all kinds of bituminous coal or anthracite, mixed coal. Well burned. Because the high-temperature flue gas first enters the settlement chamber, and then from both sides enters the two wings of the flue and the front smoke box, so the effect of smoke removal and dust removal is good. The water circulation is simple, the structure of the pressurized parts is reasonable, under the condition of ensuring water quality, it can run safely. The combustion equipment is a fast-loading grate. The combustion equipment is manufactured and installed in the factory. After transportation to the site, it can be directly installed on the foundation.



Biomass hot water boiler has reasonable structure, compact, low steel consumption, so that the boiler performance, weight, structure and size compared with the same capacity of the product has obvious advanced. The hot water boiler uses energy saving and environmental protection, adopts the new gasification combustion technology, sets the advanced gasification rotary combustion chamber, the built-in cyclone secondary air distribution, makes the fuel combustion more sufficient. Zozen Boilers products specializing in the production of high quality boiler, welcome everyone to come to consult procurement, we will serve you wholeheartedly.

E-mail us: sunhui@zozen.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more