Skip to main content

WNS Series Oil Fired Steam Boiler Manufacturer

 WNS series oil-fired steam boiler horizontal quick - mount internal - fired three - trip fire tube boiler. The bifurcated flue gas is used to wash the second and third return flue gas pipes successively, and then the flue gas chamber is discharged into the atmosphere through the chimney. The boiler is fitted with movable front and rear smoke box covers to facilitate boiler maintenance. The boiler is equipped with a burner with good technical performance. It adopts advanced technologies such as automatic proportional regulation of combustion, automatic regulation of water supply, program start and stop, automatic operation, etc. 



It also has automatic protection functions such as high and low water level alarm, extremely low water level, ultra-high steam pressure and flameout. The oil fired boiler has the characteristics of compact structure, safe and reliable, simple operation, quick installation, less pollution, low noise and high efficiency.

Oil Fired Steam BoileMaintenance Method

  1. Dry maintenance method: boiler water after the furnace put into furnace, the internal dirt thoroughly clean, rinse, drying with micro fire in the chamber of a stove or furnace (be careful not to fire), and then 10 to 30 mm in diameter size of the massive quicklime plate installed, placed in the drum, do not make contact with the metal calcium lime, lime, the weight of the drum volume 8 kilograms per cubic meter of the calculation, and then all of the manhole, hand hole pipe valve closed, once every three months to check, such as lime crushed ingredients, need to be replaced, the boiler to run quick lime and plate should be removed.
  2. Wet maintenance method: after the boiler is shut down, put out the oven water, thoroughly remove the internal dirt, rinse clean, re-inject the treated water to full, heat the furnace water to 100℃, let the gas in the water out of the oven, and then close all the valves, the moisture method should not be used in cold places, in order to avoid damage to the boiler when the furnace water freezes.


According to the operation situation of WNS series oil-fired steam boiler, it is easy and convenient to install and operate the cleaning site. This series of industrial steam boiler has the advantages of fast cleaning speed, high corrosion inhibition efficiency and simple treatment method for cleaning waste liquid.

E-mail us: sunhui@zozen.com


Comments

Post a Comment

Popular posts from this blog

Parameters and technical requirements of 6-ton gas-fired steam boiler for hospital use

 The 6ton gas-fired steam boiler is commonly used in hospitals, and its process requirements are as follows: Natural gas boiler: natural gas → burner → boiler → steam → sub-cylinder → steam point. Tap water constant pressure water supply → water softener → soft water insulation water tank → energy saver → boiler. Hospitals are densely populated places, so the requirements for boiler equipment and suppliers are relatively strict. Suppliers of 6ton gas boilers must have a Class A boiler manufacturing license, a pressure vessel manufacturing license, a Class 2 boiler installation, renovation and maintenance license or above. The equipment supplier shall be responsible for obtaining relevant certificates and fees such as the registration certificate for installation and use of boiler equipment. The water supply of this series of gas boilers is designed with a flue gas condensation recovery device to recover the heat energy of the flue gas, and the exhaust gas temperature is less than...
Post a Comment
Read more

SZS Gas-Fired Horizontal Water-Tube Saturated Steam Boiler

 The pipelines within the scope of the SZS watertube steam boiler only include the valves and pipelines from the flange of the return water check valve to the outlet valve and drain valve of the boiler body. Accessories include valves and gauges for the boiler body. Such as pressure gauges, air valves, spring safety valves, outlet and return valves, check valves, thermometers, etc. The SZS gas-fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the flue gas temperature (<70°C), improves the boiler efficiency and reduces the harmful components in the flue gas. The boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. This series of boiler products has a certain pressure bearing capacity, and no smoke leakage and air leakage will occur when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period whi...
Post a Comment
Read more

35 Tons SZS Gas Steam Boiler

 The SZS gas fired steam boiler is equipped with a flue gas condenser at the tail of the boiler body, which reduces the temperature of the flue gas, improves the efficiency of the boiler, and reduces the harmful components in the flue gas. The szs gas boiler adopts micro-positive pressure combustion, and the furnace wall tube is a full-membrane wall structure. The 35ton gas-fired boiler has a certain pressure-bearing capacity, and there will be no smoke leakage and air leakage when running under a slightly positive pressure state. The boiler is a self-contained boiler, which can shorten the installation period while meeting the transportation size requirements. At the same time, the aluminum casing and the skeleton are transported and connected by bolts, which are convenient for disassembly and maintenance. The furnace of this series of boiler products adopts a model water-cooled wall structure, and the whole boiler adopts an air-tight inner shield with a fully enclosed welding s...
Post a Comment
Read more